Sunamp Heat Batteries Nottingham

Full nationwide installation service with 10 years warranty

Sunamp Heat Batteries Nottingham

EcoSmartHeat

Sunamp Heat Batteries in Nottingham are a modern day energy saving thermal store which contain a high performance phase change that delivers warmth, safely and efficiently.

Replacing the traditional hot water cylinder Sunamp Heat Batteries are super-compact in design and easy to install and require little to maintenance.

Approximately 80% of energy used in the home is for heat, Sunamp Heat Batteries use thermal energy storage to make homes and buildings more efficient and sustainable, while reducing carbon emissions.

To find the right product for your project, use our quick and simple product selection tool.

Which Model Do You Need?

Lets Get Started

Direct Water Heater

Sunamp Heat Batteries

The sleek alternative to direct cylinders saving space and energy.

Available in four sizes which can also be combined, these are the right solution to perfectly match the hot water requirements of your property.

The perfect replacement for direct hot water cylinders. Heated by an internal element supplying hot water at the temperature you need for your property including powerful showers.

View The Range

Models Available

Direct Water Heater

Our prices are guaranteed and include removing your old system and fitting your new Sunamp with all the pipe work and extras along with specialist delivery.

Available in four sizes which can also be combined, they are the right solution to perfectly match the exact hot water requirements of your property.

  Thermino 70 Thermino 150 Thermino 210 Thermino 300
Thermino Thermino 70 ePlus Thermino 150 ePlus Thermino 210 ePlus Thermino 300 ePlus
Heat Storage Capacity (kWh)1 3 6 9 12
Equivalent Hot Water Cylinder Size2 74 142 212 306
V40, Volume of Hot Water Available at 40°C (L) 105 199 301 436
Standby Heat Loss Rate (kWh/24h | [W]) 0.48[20] 0.68[28] 0.77[32] 0.84[35]
Energy Efficiency Rating C C C C
Recommended Maximum Flow Rate (L/Min) 6 15 20 25
Heater Power Rating (~230V) 2.8kW 2.8kW 2.8kW 2.8kW
Installed Price* £3,495 £3,795 £3,995 £4,795

* Full installation by Accredited Sunamp Installers:

Our full installation service includes supply and delivery using Zonzini to the point of installation plus a full bore isolation valve, all pipe work removal of old pipework (except under floors) and removal of old unwanted header tanks if possible.

This service also comes with a .5L expansion vessel and 22mm Thermostatic blending valve as required by Sunamp to conform with their installation instructions for a valid warranty. For all PV versions the Sunamp Optimino PV key is required and we recommend the My Energi Eddi solar diverter and Harvi to maximise the use of excess PV.

Please note: If you live in a hard water area a water conditioner such as the Hydroflow HS38 needs to be fitted otherwise the Sunamp warranty will be void. The charge for this is £225 plus VAT.

Choose Your Sunamp

Indirect Water Heater

Sunamp Heat Batteries

Swap out cylinders for hot water on tap for less.

Space saving alternative for indirect heated, vented and unvented hot water cylinders and hot water only thermal stores.

This range can also be used with high temperature heat pumps accepting a volt-free hot water signal.

View The Range

Models Available

Indirect Water Heater

Our prices are guaranteed and include removing your old system and fitting your new Sunamp with all the pipe work and extras along with specialist delivery.

Available in four sizes which can also be combined, they are the right solution to perfectly match the exact hot water requirements of your property.

  Thermino 150 Thermino 210 Thermino 300
Thermino Thermino 150 xPlus Thermino 210 xPlus Thermino 300 xPlus
Heat Storage Capacity (kWh)1 7 10.5 14
Equivalent Hot Water Cylinder Size2 142 212 284
V40, Volume of Hot Water Available at 40°C (L) 185 300 370
Standby Heat Loss Rate (kWh/24h | [W]) 0.68[28] 0.77[32] 0.84[35]
Energy Efficiency Rating A+ A+ A+
Heat Power Rating (~230V) 2.8kW 2.8kW 2.8kW
Height (mm) 650 860 1070
Width x Depth (mm) 365 x 575 365 x 575 365 x 575
Installed Price* £4,295 £4,495 £5,395

* Full installation by Accredited Sunamp Installers:

Our full installation service includes supply and delivery using Zonzini to the point of installation plus a full bore isolation valve, all pipe work removal of old pipework (except under floors) and removal of old unwanted header tanks if possible.

This service also comes with a .5L expansion vessel and 22mm Thermostatic blending valve as required by Sunamp to conform with their installation instructions for a valid warranty. For all PV versions the Sunamp Optimino PV key is required and we recommend the My Energi Eddi solar diverter and Harvi to maximise the use of excess PV.

Please note: If you live in a hard water area a water conditioner such as the Hydroflow HS38 needs to be fitted otherwise the Sunamp warranty will be void. The charge for this is £225 plus VAT.

Choose Your Sunamp

Sunamp and Solar PV

Sunamp Heat Batteries

Hot water delivered more efficiently from Solar PV.

Combining your Solar PV system with Sunamp will give you even greater value by providing the household with hot water even when the sun does not shine. Storing surplus electricity from your Solar PV that would otherwise be lost back to the grid.

For even more flexibility off peak electricity can be used from the grid to top up the charge of the Sunamp battery when required.

View the Range

Models Available

Solar PV

Our prices are guaranteed and include removing your old system and fitting your new Sunamp with all the pipe work and extras along with specialist delivery.

Available in a range of sizes which can also be combined, they are the right solution to perfectly match the exact hot water requirements of your property.

  Thermino 70 Thermino 150 Thermino 210 Thermino 300 Thermino 150 Thermino 210 Thermino 300
Thermino Thermino 70 ePlus Thermino 150 ePlus Thermino 210 ePlus Thermino 300 ePlus Thermino 150 xPlus Thermino 210 xPlus Thermino 300 xPlus
Recommended flow rates (LPM) 6 15 20 25 15 20 25
Equivalent Hot Water Cylinder Size2 74 142 212 284 142 212 284
V40, Volume of Hot Water Available at 40°C (L) 105 199 301 436 185 300 370
Standby Heat Loss Rate (kWh/24h | [W]) 0.48[20] 0.68[28] 0.77[32] 0.84[35] 0.67[28.1] 0.77[32.1] 0.84[35]
Energy Efficiency Rating C C C C A+ A+ A+
Height (mm) 440 650 860 1070 640 870 1050
Width x Depth (mm) 365 x 575 365 x 575 365 x 575 365 x 575 365 x 575 365 x 575 365 x 575
Installed Price* £4,145 £4,345 £4,745 £5,375 £4,695 £4,995 £5,895

* Full installation by Accredited Sunamp Installers:

Our full installation service includes supply and delivery using Zonzini to the point of installation plus a full bore isolation valve, all pipe work removal of old pipework (except under floors) and removal of old unwanted header tanks if possible.

This service also comes with a .5L expansion vessel and 22mm Thermostatic blending valve as required by Sunamp to conform with their installation instructions for a valid warranty. For all PV versions the Sunamp Optimino PV key is required and we recommend the My Energi Eddi solar diverter and Harvi to maximise the use of excess PV.

Please note: If you live in a hard water area a water conditioner such as the Hydroflow HS38 needs to be fitted otherwise the Sunamp warranty will be void. The charge for this is £225 plus VAT.

Choose Your Sunamp

Sunamp and Heat Pumps

Sunamp Heat Batteries

Cascades of hot water from a heat pump.

Providing the hot water storage needed by heat pumps in a space saving Sunamp Heat Battery. Working with low temperature heat pumps to provide hot water for your home.

With a signal for the heat pump the batteries can be boosted electrically if required with an internal element acting as an automatic backup so you always have hot water.

View The Range

Models Available

Heat Pumps

Our prices are guaranteed and include removing your old system and fitting your new Sunamp with all the pipe work and extras along with specialist delivery.

Available in a range of sizes which can also be combined, they are the right solution to perfectly match the exact hot water requirements of your property.

  Thermino 150 Thermino 210 Thermino 300 Thermino 150 Thermino 210 Thermino 300
Thermino Thermino 150 xPlus Thermino 210 xPlus Thermino 300 xPlus Thermino 150 xPlus Thermino 210 xPlus Thermino 300 xPlus
Compatible With Samsung Heat Pumps Samsung Heat Pumps Samsung Heat Pumps Daikin Heat Pumps Daikin Heat Pumps Daikin Heat Pumps
Heat Storage Capacity (kWh)1 6.3 9.5 12.6 6.3 9.5 12.6
Equivalent Hot Water Cylinder Size2 128 192 256 128 192 256
V40, Volume of Hot Water Available at 40°C (L) 167 271 333 167 271 333
Standby Heat Loss Rate (kWh/24h | [W]) 0.68[28] 0.77[32] 0.84[35] 0.68[28] 0.77[32] 0.84[35]
Energy Efficiency Rating A+ A+ A+ A+ A+ A+
Heat Power Rating (~230V) 2.8kW 2.8kW 2.8kW 2.8kW 2.8kW 2.8kW
Height (mm) 650 860 1070 650 860 1070
Width x Depth (mm) 365 x 575 365 x 575 365 x 575 365 x 575 365 x 575 365 x 575
Installed Price* £4,695 £4,995 £5,895 £4,695 £4,995 £5,895

* Full installation by Accredited Sunamp Installers:

Our full installation service includes supply and delivery using Zonzini to the point of installation plus a full bore isolation valve, all pipe work removal of old pipework (except under floors) and removal of old unwanted header tanks if possible.

This service also comes with a .5L expansion vessel and 22mm Thermostatic blending valve as required by Sunamp to conform with their installation instructions for a valid warranty. For all PV versions the Sunamp Optimino PV key is required and we recommend the My Energi Eddi solar diverter and Harvi to maximise the use of excess PV.

Please note: If you live in a hard water area a water conditioner such as the Hydroflow HS38 needs to be fitted otherwise the Sunamp warranty will be void. The charge for this is £225 plus VAT.

Choose Your Sunamp

Comments From Our Customers

Eco Smart Heat Testimonials

  • Very pleased with Eco Smart Heat. From the initial enquiry through to planning, delivery, installation and handover the service was excellent.

    Rare these days to find such a great company that offer prices that could not be matched anywhere else.

    Steve Kirby
  • Ecosmartheat have fitted a sunamp heater for me. It was done very efficiently, turned up on time etc. Sorted out little problems on the way (getting it to work so that I can use either my existing oil boiler if I want, or the electric, and sorting a problem with the wiring).

    Also much cheaper and more helpful than a nearer supplier.

    Ruth Blake
  • Very Pleased with the fantastic job done by the guys. They installed our Sunamp heat battery in 2 days including removing old heating system, radiators, tanks etc with minimum disruption and a thoroughly professional attitude.

    Excellent problem solving too working out our antiquated old system. Best thing, all the work was covered by the original quoted price, no hidden extras.

    Thanks very much Eco Smart Heat. Highly recommended.

    Vic W
  • Excellent service from start to finish. Contacted Ben who talked me through the process and organised delivery and installation of Sunamp. Even squeezed me in before Christmas, which was very much appreciated.

    Richard came first thing as promised to install, explaining the process of the fit, making sure I was happy with everything. Very friendly and accommodating guys would definitely recommend their service and product.

    Andy
  • This is a company with great customer service and competitive pricing which provides a service nationwide. From the initial phone call enquiry to having the unit delivered, immersion heater removed & Thermino 150e installed, the email and phone communication was great.

    The installation was booked within 2 weeks. I have now saved loads of space by putting my washer and dryer into the cupboard where my Thermino is. The company also went above any beyond their normal job role by providing and installing an updated timing switch and the installation of a tee valve to relocate my washer.

    David Tomlinson

Why are we better value?

Eco Smart Heat

We charge a fair price for our products and services so perhaps you should be asking our competitors why they cost more than us?

We do not employ pushy sales executives and we do not spend big on marketing. Why? because our prices, experienced team and products sell themselves.

Compare any of our prices against our competitors and you will find us to be better value with a better service.

We are an independent, family run business with engineers that have over 20 year's experience in the industry. If you would like a free survey and a fair price, contact us today.

Get in Touch

Cookies   |   Privacy   |   Sitemap

©2021 Eco Smart Heat. All Rights Reserved | Made by JKE Web Design